NOTE: The device doesn’t have a hard drive that can be formatted.To format the device and restore the factory settings, perform afactory reset
A hard or a factory reset clears all user-defined settings,programs, and data to restore the device to its default settings.However, the data in the iPAQ File Store folder is untouched. Therefore, before performing a hard or a factory reset, save all your important data in the iPAQ File Store folder
Performing a Normal (Soft) Reset
A soft reset stops all the applications,but does not erase any programs or saved data. It also resets all hardware registers.Save any data within a application before performing a soft reset.
Follow these steps to perform a soft reset.
> Locate the recessed Reset button at the top of the device.
> Use the stylus to lightly press the Reset button.
> Release the Reset button. The device resets and turns on
Performing a Hard (Full ) Reset
Follow these steps to perform a hard reset.
1> Turn off the device.
2> Press the ok button located on the right side of the device and the Voice Commander button located on the left side of the device.
3> Use the stylus to lightly press the Reset button, keeping the ok and the Voice Commanderbuttons pressed.
Buttons combination for hard reset
--- Release the Reset button.
--- Release the ok button and the Voice Commander button when the Clean Boot message is displayed on the screen. The device restarts and turns on automatically.
Factory (Clean) Reset on a iPAQ 900
1> Performing a Factory (Clean) Reset on a iPAQ 900
2> Tap Start > Settings > System > Factory Recovery . The Factory Recovery screen is displayed.
3> Type 1234 in the text box.
4> Tap YES . The Clean Boot message is displayed on the screen and the device restarts and turns on automatically.
No comments:
Post a Comment